Wargaming Tradecraft: Making an Earthy Wall




Donate

Making an Earthy Wall


A model in my Hordeblood army has the ability to raise a protective wall of stone from the ground. As such, I've created one.

Since this isn't terrain, it's associated with a specific Privateer Press wall size, they make a template available in the back of the rulebook. Rather than just photocopy this and use a paper template, 3D would look much more awesome.



Plasticard

I measured the dimensions from the book and cut a piece of Plasticard in those dimensions. Plasticard is basically a thin piece of plastic used in hobbying because it's easy to cut and provides a sturdy surface for heavier works like terrain.

It's a good idea to have a mini nearby for scale and image when working on terrain.

Once I found some stones that looked good and had them in place how I liked, I glued them down. (Ironically, some Amethyst, though this was well before plans for the Crystalline Affliction.)

Then, as the start of the base, I filled in all around them with a few layers of heavy gel. I moulded the gel in a ways to seem like it's bursting from the ground.

 The next layer is mixed from a sandy gel, brown flock and brown paint. I cover the current layer of gel and some of the rocks.

What we end up with is basically rocks shooting up from the ground.

To finish the dirt off, I wash it with Devlan Mud and apply some highlights.

Next up is the detail to make it actually look like the rocks had a realistic ground to burst through!

I dug through my various amount of grasses, moss and other materials and glued them around. I even found some small rocks to glue to the tufts of gel still shooting out of the ground and a little greens to add to them.

Here's an example of scale, including a tease of the model I've just about finished:


1 comment:

Please keep all comments civil and language appropriate for a child-safe environment.